This is the comprehensive User Manual for the VSParticle Generator One unit. The Quick Start Guide is available as a quick reference for standard operation of the G1 unit.
-
VSParticle Generator One unit
[INCLUDE ALSO CONTACT INFORMATION within a framed box]
Introduction
top
Technical Specifications
| Flow rate |
1-30 L/min
|
| Gas |
Supported: Ar or N2 (recommended purity 5.0)
|
|
Unsupported: He, Ne, Xe, Kr
|
|
Contact VSparticle for the use of reactive gases such as air and H2.
|
| Electrode material |
Comes with Cu electrodes.
|
|
Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible.
|
| Primary particle size |
1 atom to 20 nm
|
| Ablation rate |
~0.01-100 mg/h (material dependent)
|
| Typical particle concentration |
108-1011 cm-3
|
Operating Window
| Flow rate |
1-30 L/min
|
| Gas |
Supported: Ar or N2 (recommended purity 5.0)
|
|
Unsupported: He, Ne, Xe, Kr
|
|
Contact VSparticle for the use of reactive gases such as air and H2.
|
| Electrode material |
Comes with Cu electrodes.
|
|
Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible.
|
| Primary particle size |
1 atom to 20 nm
|
| Ablation rate |
~0.01-100 mg/h (material dependent)
|
| Typical particle concentration |
108-1011 cm-3
|
How to use this manual
Symbols guide
Found on the unit
Used within the user manual
Safety
top
Warning of residual risks
Protective measures
Airborne noise emissions
Foreseeable misuse
Setting up
top
Intended use
Foreseeable misuse
Workstation
Assembly, installation and connection
Stability conditions
Safe transportation, handling and storage
Operations
top
Instructions for putting into service and use of the G1 unit
What to do in the case of accident, breakdown or likely blockage
Description of adjustment and maintenance operations and preventive maintenance measures
Instructions to enable safe adjustment and maintenance, including protective measures
Maintenance and Troubleshooting
top
Error messages and how to resolve them
Possible issues and how to resolve them
Maintenance checklist (before and after normal use)
Maintenance checklist (periodical/occasional throughout product lifetime)
Accessories and Parts Replacement
top
Tools fitted to G1
Spare parts
Appendices
top
Detailed communication set up
Detailed specifications not otherwise indicated in manual
Conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.
Descriptions and explanations necessary for the understanding of ˄˄ and operation of electrical equipment
EC Declaration of Conformity
top
Warranty
top
