VSP-G1 Technical Specifications: Difference between revisions
From VSPARTICLE - Docs
m (K.groves moved page G1 Technical Specifications to VSP-G1 Technical Specifications) |
T.coppejans (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Unit | == Unit specifications <mark>possibly edit based on final design specs</mark> == | ||
{| class="table table-bordered table-striped" | |||
|- | |- | ||
! Specification !! Value | |||
|- | |- | ||
| ||Reactor added height ca. 10cm | |''Mains supply voltage'' ||110-240V AC | ||
|- | |||
|''Mains frequency'' ||50-60Hz | |||
|- | |||
|''Power'' ||175 V-A | |||
|- | |||
|''Dimensions'' ||Casing ca. 52x30x20cm <br />Reactor added height ca. 10cm | |||
|- | |- | ||
|''Weight'' ||19kg | |''Weight'' ||19kg | ||
| Line 16: | Line 20: | ||
|''Digital output'' ||RS232 | |''Digital output'' ||RS232 | ||
|} | |} | ||
== Operating | == Operating window == | ||
{| class="table table-striped table-bordered" | |||
! Parameter !! Value | |||
|- | |- | ||
|''Flow rate'' ||1-30 L/min | |''Flow rate'' ||1-30 L/min | ||
|- | |- | ||
|''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) <br> Unsupported: He, Ne, Xe, Kr <br> Contact VSParticle for the use of reactive gases such as air and H<sub>2</sub>. | |''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) <br> Unsupported: He, Ne, Xe, Kr <br> {{Notification|Contact VSParticle| for the use of reactive gases such as air and H<sub>2</sub>.}} | ||
|- | |- | ||
|''Electrode material'' ||Comes with Cu electrodes. <br> Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. | |''Electrode material'' ||Comes with Cu electrodes. <br> Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. | ||
|- | |- | ||
|''Primary particle size'' ||1 atom to 20 nm | |''Primary particle size'' ||1 atom to 20 nm | ||
|- | |- | ||
|''Ablation rate'' ||~0.01-100 mg/h (material dependent) | |''Ablation rate'' ||~0.01-100 mg/h (material dependent) | ||
|- | |- | ||
|''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup> | |''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup> | ||
|} | |} | ||
</ | |||
== External circuit terminals''' <mark>confirm text</mark> == | |||
{| class="table table-bordered table-striped" | |||
!Terminal !! RS-232 (189.01-113) !! HVout, HVret (A2J3, A2J4) | |||
|- | |||
!Description | |||
|Serial connector conform RS-232 specification, using only GND, Rx and Tx.||Coaxial connectors for high voltage connection to reactor. NOT FOR USE WITH EXTERNAL CIRCUITS. Instructions specify this. Terminal inactive if screw knobs not installed. | |||
|- | |||
!Connector | |||
|F-DE9 (sub-D, 9 pin) (RS 472-843)||189.00-155 (LEMO FAA.1S.405.CTA) | |||
|- | |||
!Rating/specification | |||
|RS-232||5kV / 21 mA d.c. | |||
|- | |||
!Voltage rating | |||
|Isolated 2.5kV||10.5kV d.c. (plug) | |||
|- | |||
!Current rating | |||
| - ||8A d.c. (plug) | |||
|- | |||
!Other | |||
|UL1577||IP 5.0, 10.5mm creepage, PTFE insulation | |||
|} | |||
Revision as of 17:39, 16 March 2017
Unit specifications possibly edit based on final design specs
| Specification | Value |
|---|---|
| Mains supply voltage | 110-240V AC |
| Mains frequency | 50-60Hz |
| Power | 175 V-A |
| Dimensions | Casing ca. 52x30x20cm Reactor added height ca. 10cm |
| Weight | 19kg |
| Gas inlet/outlet | 10mm tubes (with Swagelok connectors) |
| Display | 16x2 characters |
| Digital output | RS232 |
Operating window
| Parameter | Value |
|---|---|
| Flow rate | 1-30 L/min |
| Gas | Supported: Ar or N2 (recommended purity 5.0) Unsupported: He, Ne, Xe, Kr Notification: Contact VSParticle for the use of reactive gases such as air and H2. |
| Electrode material | Comes with Cu electrodes. Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. |
| Primary particle size | 1 atom to 20 nm |
| Ablation rate | ~0.01-100 mg/h (material dependent) |
| Typical particle concentration | 108-1011 cm-3 |
External circuit terminals confirm text
| Terminal | RS-232 (189.01-113) | HVout, HVret (A2J3, A2J4) |
|---|---|---|
| Description | Serial connector conform RS-232 specification, using only GND, Rx and Tx. | Coaxial connectors for high voltage connection to reactor. NOT FOR USE WITH EXTERNAL CIRCUITS. Instructions specify this. Terminal inactive if screw knobs not installed. |
| Connector | F-DE9 (sub-D, 9 pin) (RS 472-843) | 189.00-155 (LEMO FAA.1S.405.CTA) |
| Rating/specification | RS-232 | 5kV / 21 mA d.c. |
| Voltage rating | Isolated 2.5kV | 10.5kV d.c. (plug) |
| Current rating | - | 8A d.c. (plug) |
| Other | UL1577 | IP 5.0, 10.5mm creepage, PTFE insulation |
