VSP-G1 User Manual: Difference between revisions
From VSPARTICLE - Docs
| Line 30: | Line 30: | ||
=== Operating Window === | === Operating Window === | ||
{| style | {| style:"border: 1px solid orange"; | ||
|- | |-valign="top" | ||
|''Flow rate'' ||1-30 L/min | |''Flow rate'' ||1-30 L/min | ||
|- | |-valign="top" | ||
|''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) | |''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) <br> Unsupported: He, Ne, Xe, Kr <br> Contact VSParticle for the use of reactive gases such as air and H<sub>2</sub>. | ||
|-valign="top" | |||
|''Electrode material'' ||Comes with Cu electrodes. <br> Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. | |||
|-valign="top" | |||
|- | |||
|''Electrode material'' ||Comes with Cu electrodes. | |||
|- | |||
|''Primary particle size'' ||1 atom to 20 nm | |''Primary particle size'' ||1 atom to 20 nm | ||
|- | |-valign="top" | ||
|''Ablation rate'' ||~0.01-100 mg/h (material dependent) | |''Ablation rate'' ||~0.01-100 mg/h (material dependent) | ||
|- | |-valign="top" | ||
|''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup> | |''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup> | ||
|} | |} | ||
Revision as of 12:44, 7 September 2016
This is the comprehensive User Manual for the VSParticle Generator One unit. The Quick Start Guide is available as a quick reference for standard operation of the G1 unit.
-
VSParticle Generator One unit
[INCLUDE ALSO CONTACT INFORMATION within a framed box]
Introduction
Technical Specifications
| Power | 110-240V AC |
| Dimensions | Casing ca. 52x30x20cm |
| Reactor added height ca. 10cm | |
| Weight | 19kg |
| Gas inlet/outlet | 10mm tubes (with Swagelok connectors) |
| Display | 16x2 characters |
| Digital output | RS232 |
Operating Window
| Flow rate | 1-30 L/min |
| Gas | Supported: Ar or N2 (recommended purity 5.0) Unsupported: He, Ne, Xe, Kr Contact VSParticle for the use of reactive gases such as air and H2. |
| Electrode material | Comes with Cu electrodes. Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. |
| Primary particle size | 1 atom to 20 nm |
| Ablation rate | ~0.01-100 mg/h (material dependent) |
| Typical particle concentration | 108-1011 cm-3 |
