VSP-G1 Technical Specifications: Difference between revisions

Revision as of 09:38, 28 March 2017

Specification	Value
Mains supply voltage	110-240V AC
Mains frequency	50-60Hz
Power	175 V-A
Dimensions	Casing ca. 52x30x20cm Reactor added height ca. 10cm
Weight	Base unit: 16kg Reactor assembly: 6kg Mount plate: 3kg
Gas inlet/outlet	10mm tubes (with Swagelok connectors)
Display	16x2 characters
Digital output	RS232

Parameter	Value
Flow rate	1-30 L/min
Gas	Supported: Ar or N₂ (recommended purity 5.0) Unsupported: He, Ne, Xe, Kr Notification: Contact VSParticle for the use of reactive gases such as air and H₂.
Electrode material	Comes with Cu electrodes. Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible.
Primary particle size	1 atom to 20 nm
Ablation rate	~0.01-100 mg/h (material dependent)
Typical particle concentration	10⁸-10¹¹ cm^-3

== External circuit terminals

@@ Line 40: / Line 40: @@
 |}
-== External circuit terminals''' <mark>confirm text</mark> ==
+== External circuit terminals'''
 {| class="table table-bordered table-striped"
-!Terminal !! RS-232 (189.01-113) !! HVout, HVret (A2J3, A2J4)
+!Terminal !! RS-232
 |-
 !Description
-|Serial connector conform RS-232 specification, using only GND, Rx and Tx.||Coaxial connectors for high voltage connection to reactor. NOT FOR USE WITH EXTERNAL CIRCUITS. Instructions specify this. Terminal inactive if screw knobs not installed.
+|Serial connector
 |-
 !Connector
-|F-DE9 (sub-D, 9 pin) (RS 472-843)||189.00-155 (LEMO FAA.1S.405.CTA)
+|F-DE9 (sub-D, 9 pin)
 |-
 !Rating/specification
-|RS-232||5kV / 21 mA d.c.
+|RS-232, only pins 2, 3, 5 connected
 |-
 !Voltage rating
-|Isolated 2.5kV||10.5kV d.c. (plug)
+|Isolated 2.5kV
-|-
-!Current rating
-| - ||8A d.c. (plug)
-|-
-!Other
-|UL1577||IP 5.0, 10.5mm creepage, PTFE insulation
 |}