VSP-G1 User Manual: Difference between revisions

Revision as of 12:26, 7 September 2016

This is the comprehensive User Manual for the VSParticle Generator One unit. The Quick Start Guide is available as a quick reference for standard operation of the G1 unit.

VSParticle Generator One unit

[INCLUDE ALSO CONTACT INFORMATION within a framed box]

Introduction

top

Technical Specifications

Power	110-240V AC
Dimensions	Casing ca. 52x30x20cm
	Reactor added height ca. 10cm
Weight	19kg
Gas inlet/outlet	10mm tubes (with Swagelok connectors)
Display	16x2 characters
Digital output	RS232

Operating Window

Flow rate	1-30 L/min
Gas	Supported: Ar or N₂ (recommended purity 5.0)
	Unsupported: He, Ne, Xe, Kr
	Contact VSparticle for the use of reactive gases such as air and H₂.
Electrode material	Comes with Cu electrodes.
	Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible.
Primary particle size	1 atom to 20 nm
Ablation rate	~0.01-100 mg/h (material dependent)
Typical particle concentration	10⁸-10¹¹ cm^-3

How to use this manual

Symbols guide

Found on the unit

Used within the user manual

Safety

top

Warning of residual risks

Protective measures

Airborne noise emissions

Foreseeable misuse

Setting up

top

Intended use

Foreseeable misuse

Workstation

Assembly, installation and connection

Stability conditions

Safe transportation, handling and storage

Operations

top

Instructions for putting into service and use of the G1 unit

What to do in the case of accident, breakdown or likely blockage

Description of adjustment and maintenance operations and preventive maintenance measures

Instructions to enable safe adjustment and maintenance, including protective measures

Maintenance and Troubleshooting

top

Error messages and how to resolve them

Possible issues and how to resolve them

Maintenance checklist (before and after normal use)

Maintenance checklist (periodical/occasional throughout product lifetime)

Accessories and Parts Replacement

top

Tools fitted to G1

Spare parts

Appendices

top

Detailed communication set up

Detailed specifications not otherwise indicated in manual

Conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.

Descriptions and explanations necessary for the understanding of ˄˄ and operation of electrical equipment

EC Declaration of Conformity

top

Warranty

top

@@ Line 14: / Line 14: @@
 {| style="margin-left: auto; margin-right: auto; border: 1px solid orange;"
 |-
-|''Flow rate'' ||1-30 L/min
+|''Power'' ||110-240V AC
 |-
-|''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0)
+|''Dimensions'' ||Casing ca. 52x30x20cm
 |-
-| ||Unsupported: He, Ne, Xe, Kr
+| ||Reactor added height ca. 10cm
 |-
-| ||Contact VSparticle for the use of reactive gases such as air and H<sub>2</sub>.
+|''Weight'' ||19kg
 |-
-|''Electrode material'' ||Comes with Cu electrodes.
+|''Gas inlet/outlet'' ||10mm tubes (with Swagelok connectors)
 |-
-| ||Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible.
+|''Display'' ||16x2 characters
 |-
-|''Primary particle size'' ||1 atom to 20 nm
+|''Digital output'' ||RS232
-|-
-|''Ablation rate'' ||~0.01-100 mg/h (material dependent)
-|-
-|''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup>
 |}