VSP-G1 User Manual: Difference between revisions
From VSPARTICLE - Docs
| Line 14: | Line 14: | ||
{| | {| | ||
|- | |- | ||
| ''Flow rate'' ||1-30 L/min | |''Flow rate'' ||1-30 L/min | ||
|- | |- | ||
| ''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) | |''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) | ||
|- | |- | ||
| ||Unsupported: He, Ne, Xe, Kr | | ||Unsupported: He, Ne, Xe, Kr | ||
| Line 22: | Line 22: | ||
| ||Contact VSparticle for the use of reactive gases such as air and H<sub>2</sub>. | | ||Contact VSparticle for the use of reactive gases such as air and H<sub>2</sub>. | ||
|- | |- | ||
| ''Electrode material'' ||Comes with Cu electrodes. | |''Electrode material'' ||Comes with Cu electrodes. | ||
|- | |- | ||
| ||Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. | | ||Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. | ||
|- | |- | ||
| ''Primary particle size'' ||1 atom to 20 nm | |''Primary particle size'' ||1 atom to 20 nm | ||
|- | |- | ||
| ''Ablation rate'' ||~0.01-100 mg/h (material dependent) | |''Ablation rate'' ||~0.01-100 mg/h (material dependent) | ||
|- | |- | ||
| ''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup> | |''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup> | ||
|} | |} | ||
Revision as of 11:07, 7 September 2016
This is the comprehensive User Manual for the VSParticle Generator One unit. The Quick Start Guide is available as a quick reference for standard operation of the G1 unit.
-
VSParticle Generator One unit
[INCLUDE ALSO CONTACT INFORMATION within a framed box]
Introduction
Technical Specifications
| Flow rate | 1-30 L/min |
| Gas | Supported: Ar or N2 (recommended purity 5.0) |
| Unsupported: He, Ne, Xe, Kr | |
| Contact VSparticle for the use of reactive gases such as air and H2. | |
| Electrode material | Comes with Cu electrodes. |
| Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible. | |
| Primary particle size | 1 atom to 20 nm |
| Ablation rate | ~0.01-100 mg/h (material dependent) |
| Typical particle concentration | 108-1011 cm-3 |
