VSP-G1 Quick Start Guide: Difference between revisions

Revision as of 10:57, 5 July 2017

This is the Quick Start Guide for standard operation of a VSParticle Generator One (VSP-G1) unit. For first time operators, detailed information or troubleshooting, please refer to the User Manual.

A themed and printable version of the quick start guide is available for download here: File:VSP-G1 Quick Start Guide.pdf. A laminated copy of this version is included in the box in which the VSP-G1 is delivered.

Ensure a safe system

@@ Line 1: / Line 1: @@
 This is the '''Quick Start Guide''' for standard operation of a VSParticle Generator One (VSP-G1) unit. For first time operators, detailed information or troubleshooting, please refer to the [https://docs.vsparticle.com/w/index.php/G1_User_Manual#Generator_One_.28G1.29_User_Manual'''''User Manual'''''].
-== Printable version ==
+<!-- == Printable version == -->
 A themed and printable version of the quick start guide is available for download here:
 [[File:VSP-G1_Quick_Start_Guide.pdf|thumb|Quick Start Guide]]. A laminated copy of this version is included in the box in which the VSP-G1 is delivered.
-==Features of the VSP-G1==
+== Ensure a safe system ==
-* visual guide to the machine and its parts
-==Standard Operation==
+== Connect power & turn the system on ==
-''See the "Operating the system" <span style="background:#00FF00">[hyperlink]</span> chapter within the VSP-G1 User's Manual for a more detailed description of the standard procedure using a basic setup as a guide.''<br>
-'''''Prepare the system for production'''''
+== Perform electrode alignment procedure ==
-# Design/draw your flow diagram.
-# Assemble the setup according to your specifications. (Ensure that the reactor is closed and mounted <span style="background:#00FF00">[hyperlink to Mounting the reactor in the Setup chapter of the User's Manual]</span> correctly!)
-# Check the connections.
-# Check the system for leak tightness and make adjustments if necessary. (See leak tightness protocol <span style="background:#00FF00">[hyperlink]</span>) <span style="background:#00FF00">[insert note about pressure safety in the right margin here]</span>
-'''''Start nanoparticle production'''''
+== Start gas flow ==
-# Check for leaks if any changes were made to the system (see step 4 of ''Prepare the system for production'').
-# Power up all systems.
-# Ensure that the path to the exhaust is clear.
-# Begin gas flow.
-# Set target voltage and current using the dials on the VSP-G1.
-# Press the start button to begin production.
-<span style="background:#00FF00">[Insert stabilisation note in the right margin]</span>
-'''''Remove your sample''''' <br> When the deposition system is full or when you’ve produced the desired amount of nanoparticles,
-# Stop particle production.
-# Flush the system <span style="background:#00FF00">[hyperlink]</span> (9 x τ).
-# Stop the gas flow.
-# Take out your sample following the procedure for your deposition system.
-== Standard Configurations ==
+== Set parameters and start sparking ==
-== Maintenance ==
+== Stop sparking and shut down ==
-* Leak tightness protocol
-* Flushing the system
-* Replacing the filter(s)
-* Cleaning the reactor
-* Replacing the electrodes
-== Contact information ==
-'''VSParticle'''<br>
-Molengraafssingel, 10 <br>
-JD Delft <br>
-The Netherlands <br>
-support@vsparticle.com <br>
-www.vsparticle.com <br>
-Last updated 15:19, 20 October 2016 (CEST)