View source for VSP-G1 Technical Specifications

== Unit specifications ==
{| class="table table-bordered table-striped"
|-
! Specification !! Value
|-
|''Mains supply voltage'' ||110-240V AC
|-
|''Mains frequency'' ||50-60Hz
|-
|''Power'' ||175 V-A
|-
|''Dimensions'' ||Casing ca. 52x30x20cm <br />Reactor added height ca. 10cm
|-
|''Weight'' ||Base unit: 16kg<br />
Reactor assembly: 6kg<br />
Mount plate: 3kg
|-
|''Gas inlet/outlet'' ||10mm tubes (with Swagelok connectors)
|-
|''Display'' ||16x2 characters
|-
|''Digital output'' ||RS232
|}

== Operating window ==
{| class="table table-striped table-bordered"
! Parameter !! Value
|-
|''Flow rate'' ||1-30 L/min
|-
|''Gas'' ||Supported: Ar or N<sub>2</sub> (recommended purity 5.0) <br> Unsupported: He, Ne, Xe, Kr <br> {{Notification|Contact VSParticle| for the use of reactive gases such as air and H<sub>2</sub>.}}
|-
|''Electrode material'' ||Comes with Cu electrodes. <br> Various other metals (e.g. Ag, Au, Pt, W, Ni), semiconductors and carbon are possible.
|-
|''Primary particle size'' ||1 atom to 20 nm
|-
|''Ablation rate'' ||~0.01-100 mg/h (material dependent)
|-
|''Typical particle concentration'' ||10<sup>8</sup>-10<sup>11</sup> cm<sup>-3</sup>
|}

== External circuit terminals ==
{| class="table table-bordered table-striped"
!Terminal
|RS-232 
|-
!Description
|Serial connector
|-
!Connector
|F-DE9 (sub-D, 9 pin)
|-
!Rating/specification
|RS-232, only pins 2, 3, 5 connected
|-
!Voltage rating 
|Isolated 2.5kV
|}

== Environmental Conditions ==
The VSP-G1 is designed to be safe under the following normal environmental conditions:
* Indoor use;
* Altitude up to 2,000 m;
* Temperature 5 &deg;C to 40 &deg;C;
* Maximum relative humidity 80 % for temperatures up to 31 &deg;C decreasing linearly to 50 % relative humidity at 40 &deg;C;
* Mains supply voltage fluctuations up to &plusmn;10 % of the nominal voltage;
* Transient overvoltages up to the levels of overvoltage category II;
* Temporary overvoltages occurring on the mains supply; and
* Pollution degree 2.