VSP-G1 Detailed System Description - Revision history

T.coppejans: /* Symbols */

2017-07-05T15:18:34Z

Symbols

← Older revision		Revision as of 15:18, 5 July 2017
Line 125:		Line 125:
	\|[[File:Warranty void.jpeg\|thumb\|128px\|center\| Warranty seal ]] \|\| On one of the screws holding a plate of the base unit housing \|\|Warranty void if seal is broken. There are no user-serviceable parts in the reactor base unit. Do not remove any of the plates, additional warranty seals are present inside the housing on all cover plates. \|\| Refer to the [[VSP-G1_User_Manual#Troubleshooting\|Troubleshooting section in the user manual]] when you encounter issues with the base unit or contact VSParticle.		\|[[File:Warranty void.jpeg\|thumb\|128px\|center\| Warranty seal ]] \|\| On one of the screws holding a plate of the base unit housing \|\|Warranty void if seal is broken. There are no user-serviceable parts in the reactor base unit. Do not remove any of the plates, additional warranty seals are present inside the housing on all cover plates. \|\| Refer to the [[VSP-G1_User_Manual#Troubleshooting\|Troubleshooting section in the user manual]] when you encounter issues with the base unit or contact VSParticle.
	\|-		\|-
	\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See [[VSP-G1_Detailed_System_Description#Reactor_assembly\|\|the section on the reactor assembly above]].		\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See [[VSP-G1_Detailed_System_Description#Reactor_assembly\|the section on the reactor assembly above]].
	\|-		\|-
	\| [[File:UV light warning.png\|thumb\|200px\|center\|UV warning]] \|\| On the outer rim of the view port cover. \|\|UV radiation is harmful to the eyes, do not remove the viewport cover when the spark generator is in use. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.		\| [[File:UV light warning.png\|thumb\|200px\|center\|UV warning]] \|\| On the outer rim of the view port cover. \|\|UV radiation is harmful to the eyes, do not remove the viewport cover when the spark generator is in use. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
Line 131:		Line 131:
	\| [[File:UV light danger.png\|thumb\|200px\|center\|UV exposure]] \|\| On the outer rim of the view port. \|\| UV radiation is harmful to the eyes, put the viewport cover on the viewport before running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.		\| [[File:UV light danger.png\|thumb\|200px\|center\|UV exposure]] \|\| On the outer rim of the view port. \|\| UV radiation is harmful to the eyes, put the viewport cover on the viewport before running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
	\|-		\|-
	\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See [[VSP-G1_Detailed_System_Description#Reactor_assembly\|\|the section on the reactor assembly above]].		\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See [[VSP-G1_Detailed_System_Description#Reactor_assembly\|the section on the reactor assembly above]].
	\|-		\|-
	\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.		\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.

T.coppejans: /* Symbols */

2017-07-05T15:17:55Z

Symbols

← Older revision		Revision as of 15:17, 5 July 2017
Line 125:		Line 125:
	\|[[File:Warranty void.jpeg\|thumb\|128px\|center\| Warranty seal ]] \|\| On one of the screws holding a plate of the base unit housing \|\|Warranty void if seal is broken. There are no user-serviceable parts in the reactor base unit. Do not remove any of the plates, additional warranty seals are present inside the housing on all cover plates. \|\| Refer to the [[VSP-G1_User_Manual#Troubleshooting\|Troubleshooting section in the user manual]] when you encounter issues with the base unit or contact VSParticle.		\|[[File:Warranty void.jpeg\|thumb\|128px\|center\| Warranty seal ]] \|\| On one of the screws holding a plate of the base unit housing \|\|Warranty void if seal is broken. There are no user-serviceable parts in the reactor base unit. Do not remove any of the plates, additional warranty seals are present inside the housing on all cover plates. \|\| Refer to the [[VSP-G1_User_Manual#Troubleshooting\|Troubleshooting section in the user manual]] when you encounter issues with the base unit or contact VSParticle.
	\|-		\|-
	\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See ~~<mark>''System description: Reactor~~ assembly~~''</mark>~~.		\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See [[VSP-G1_Detailed_System_Description#Reactor_assembly\|\|the section on the reactor assembly above]].
	\|-		\|-
	\| [[File:UV light warning.png\|thumb\|200px\|center\|UV warning]] \|\| On the outer rim of the view port cover. \|\|UV radiation is harmful to the eyes, do not remove the viewport cover when the spark generator is in use. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.		\| [[File:UV light warning.png\|thumb\|200px\|center\|UV warning]] \|\| On the outer rim of the view port cover. \|\|UV radiation is harmful to the eyes, do not remove the viewport cover when the spark generator is in use. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
Line 131:		Line 131:
	\| [[File:UV light danger.png\|thumb\|200px\|center\|UV exposure]] \|\| On the outer rim of the view port. \|\| UV radiation is harmful to the eyes, put the viewport cover on the viewport before running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.		\| [[File:UV light danger.png\|thumb\|200px\|center\|UV exposure]] \|\| On the outer rim of the view port. \|\| UV radiation is harmful to the eyes, put the viewport cover on the viewport before running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
	\|-		\|-
	\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See ~~<mark>''System description: Reactor~~ assembly~~''</mark>~~.		\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See [[VSP-G1_Detailed_System_Description#Reactor_assembly\|\|the section on the reactor assembly above]].
	\|-		\|-
	\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.		\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.

T.coppejans: /* Symbols */

2017-07-05T15:14:37Z

Symbols

← Older revision		Revision as of 15:14, 5 July 2017
Line 115:		Line 115:
	\| Lower right hand corner of the top of the base unit.		\| Lower right hand corner of the top of the base unit.
	\| All purpose warning label for the operator to read and fully understand the User Manual (and all warnings) before use.		\| All purpose warning label for the operator to read and fully understand the User Manual (and all warnings) before use.
	\| Refers to the entire User Manual. Information about leak tightness can be found in the ~~<mark>''Miscellaneous~~ operating ~~protocols'' section~~.~~</mark>~~		\| Refers to the entire User Manual. Information about leak tightness can be found in the [[VSP-G1_Operating_and_maintenance_guide\| operating and maintenance guide]].
	\|-		\|-
	\| [[File:Reactor housing danger.png\|thumb\|200px\|center\|Do not operate without reactor]] \|\| On the mount plate underneath the reactor housing. \|\| Do not remove reactor housing when running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.		\| [[File:Reactor housing danger.png\|thumb\|200px\|center\|Do not operate without reactor]] \|\| On the mount plate underneath the reactor housing. \|\| Do not remove reactor housing when running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.

T.coppejans: /* Base unit */

2017-07-05T15:13:48Z

Base unit

← Older revision		Revision as of 15:13, 5 July 2017
Line 58:		Line 58:

	=== Base unit ===		=== Base unit ===
	<mark>Image of the front view of the base unit was changed on 31 January to show #17 on both sides of the unit (handholds). Make sure that this image is visible on this page.</mark>		<!--<mark>Image of the front view of the base unit was changed on 31 January to show #17 on both sides of the unit (handholds). Make sure that this image is visible on this page.</mark>-->

	[[image:Base unit front paint by number.png\|full\|none\|Front view of the base unit with the reactor mount plate.]]		[[image:Base unit front paint by number.png\|full\|none\|Front view of the base unit with the reactor mount plate.]]

T.coppejans: /* Transport plate */

2017-07-05T15:13:22Z

Transport plate

← Older revision		Revision as of 15:13, 5 July 2017
Line 50:		Line 50:

	[[image:Mount tool.PNG\|thumb\|none\|The transport plate.]]		[[image:Mount tool.PNG\|thumb\|none\|The transport plate.]]
	The transport plate is similar to the mount plate that connects the reactor to the base unit, but it contains ~~<span style="background:#FFFF00">~~ledges~~</span>~~ that help ensure that parts of the reactor are aligned properly when opening/closing the clamps (#3). It provides a stable surface for working with the dismounted reactor and/or transporting it to a safe environment for maintenance activities. ~~<br>~~		The transport plate is similar to the mount plate that connects the reactor to the base unit, but it contains ledges that help ensure that parts of the reactor are aligned properly when opening/closing the clamps (#3). It provides a stable surface for working with the dismounted reactor and/or transporting it to a safe environment for maintenance activities.

	For your safety and to minimize risk of dropping/damaging the reactor, ensure that you always:		For your safety and to minimize risk of dropping/damaging the reactor, ensure that you always:
	* attach the reactor to the transport plate using the alignment pins (#10);		* attach the reactor to the transport plate using the alignment pins (#10);

T.coppejans: /* Base unit */

2017-07-05T10:17:01Z

Base unit

← Older revision		Revision as of 10:17, 5 July 2017
Line 98:		Line 98:
	The base unit contains the motor for operating the spark generator. The base unit also contains the manual controls for fine tuning the operation of the spark generator, from spark frequency (#15) to the amount of power to the spark production (#14). On top of the base unit is the mount plate for connecting the reactor housing to the base unit. The alignment plates (#12) help ensure the reactor is aligned properly when mounted. Using the handholds on the sides of the base unit (#17), please place it on a stable flat surface that provides free physical access to the gas input and output connections (#8 and #9), and provides freedom of access to the power controls and plug (#13, #18, and #20).		The base unit contains the motor for operating the spark generator. The base unit also contains the manual controls for fine tuning the operation of the spark generator, from spark frequency (#15) to the amount of power to the spark production (#14). On top of the base unit is the mount plate for connecting the reactor housing to the base unit. The alignment plates (#12) help ensure the reactor is aligned properly when mounted. Using the handholds on the sides of the base unit (#17), please place it on a stable flat surface that provides free physical access to the gas input and output connections (#8 and #9), and provides freedom of access to the power controls and plug (#13, #18, and #20).

	The on/off power switch (#18) as well as the connection plugs for power (#20), communication (#22) and fuse (#19) are located on the back of the base unit. Also located on the back of the base unit is a functional earth terminal (#21). The fuseholder accepts ~~<span style="background:#FFFF00">~~5x20mm T2.5A/250V fuses~~</span>~~.		The on/off power switch (#18) as well as the connection plugs for power (#20), communication (#22) and fuse (#19) are located on the back of the base unit. Also located on the back of the base unit is a functional earth terminal (#21). The fuseholder accepts 5x20mm T2.5A/250V fuses.

	=== Other ===		=== Other ===

T.coppejans: /* Symbols */

2017-07-05T10:14:54Z

Symbols

← Older revision		Revision as of 10:14, 5 July 2017
Line 132:		Line 132:
	\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See <mark>''System description: Reactor assembly''</mark>.		\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See <mark>''System description: Reactor assembly''</mark>.
	\|-		\|-
	\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.		\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.
	\|-		\|-
	\| [[File:Functional earth.png\|thumb\|128px\|center\|Functional earth terminal]] \|\| On back of the base unit, above the functional earth terminal. \|\| Functional earth terminal for extra grounding protection. \|\| See [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]] for more information.		\| [[File:Functional earth.png\|thumb\|128px\|center\|Functional earth terminal]] \|\| On back of the base unit, above the functional earth terminal. \|\| Functional earth terminal for extra grounding protection. \|\| See [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]] for more information.

T.coppejans: /* Symbols */

2017-07-05T10:11:35Z

Symbols

← Older revision		Revision as of 10:11, 5 July 2017
Line 126:		Line 126:
	\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See <mark>''System description: Reactor assembly''</mark>.		\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See <mark>''System description: Reactor assembly''</mark>.
	\|-		\|-
	\| [[File:UV light warning.png\|thumb\|200px\|center\|UV warning]] \|\| On the outer rim of the view port cover. \|\|UV radiation is harmful to the eyes, do not remove the viewport ~~filter~~ when the spark generator is in use. \|\| See ~~<mark>''System description: Reactor~~ assembly~~''</mark>~~.		\| [[File:UV light warning.png\|thumb\|200px\|center\|UV warning]] \|\| On the outer rim of the view port cover. \|\|UV radiation is harmful to the eyes, do not remove the viewport cover when the spark generator is in use. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
	\|-		\|-
	\| [[File:UV light danger.png\|thumb\|200px\|center\|UV exposure]] \|\| On the outer rim of the view port. \|\| UV radiation is harmful to the eyes, put the viewport ~~filter~~ on the viewport before running the spark generator. \|\| See ~~<mark>''System description: Reactor~~ assembly~~''</mark>~~.		\| [[File:UV light danger.png\|thumb\|200px\|center\|UV exposure]] \|\| On the outer rim of the view port. \|\| UV radiation is harmful to the eyes, put the viewport cover on the viewport before running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
	\|-		\|-
	\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See <mark>''System description: Reactor assembly''</mark>.		\| [[File:Gas inlet only.png\|thumb\|128px\|center\|Use as gas inlet only ]] \|\| On the gas inlet of the left reactor end cap. \|\|Gas inlet connection only. \|\| See <mark>''System description: Reactor assembly''</mark>.
	\|-		\|-
	\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see ~~<mark >''Setting up: Electronics;''</mark>~~ for information about pressure safety, see ~~<mark>''Basic operating procedure''</mark>~~.		\| [[File:Machine label.png\|thumb\|200px\|center\|VSP-G1 type plate]] \|\| On the back panel of the VSP-G1 base unit. \|\| Important technical specification information relevant to running the VSP-G1 unit, contact information, and warning against opening the system (no user replaceable parts). \|\| For information about electrical supply, see [[VSP-G1_User_Manual#Electronic_connections]], for information about pressure safety, see [[VSP-G1_User_Manual#Gas_pressure_monitoring \| the gas pressure monitoring section of the user manual]] for more information.
	\|-		\|-
	\| [[File:Functional earth.png\|thumb\|128px\|center\|Functional earth terminal]] \|\| On back of the base unit, above the functional earth terminal. \|\| Functional earth terminal for extra grounding protection. \|\| See ~~<mark>''Setting up: Electronics''</mark>~~.		\| [[File:Functional earth.png\|thumb\|128px\|center\|Functional earth terminal]] \|\| On back of the base unit, above the functional earth terminal. \|\| Functional earth terminal for extra grounding protection. \|\| See [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]] for more information.
	\|-		\|-
	\| [[File:RS232.png\|thumb\|128px\|center\|RS232 port ]] \|\| On back panel of the VSP-G1 base unit, above the RS-232 communication port. \|\| RS-232 communication port. \|\| See ~~<mark>''System description: cables''</mark>~~.		\| [[File:RS232.png\|thumb\|128px\|center\|RS232 port ]] \|\| On back panel of the VSP-G1 base unit, above the RS-232 communication port. \|\| RS-232 communication port. \|\| See [[VSP-G1_User_Manual#Electronic_connections \| the electronic connections section of the user manual]] for more information on the connection and the [[VSP-G1_Remote_control_guide \| remote control guide]] for setting up remote control.
	\|}		\|}

T.coppejans: /* Reactor assembly */

2017-07-05T10:04:02Z

Reactor assembly

← Older revision		Revision as of 10:04, 5 July 2017
Line 17:		Line 17:
	\| 5 \|\| Viewport		\| 5 \|\| Viewport
	\|-		\|-
	\| 6 \|\| Viewport ~~filter~~		\| 6 \|\| Viewport cover
	\|-		\|-
	\| 7 \|\| O-ring and clamp for the viewport (opened/closed with a tool)		\| 7 \|\| O-ring and clamp for the viewport (opened/closed with a tool)
Line 40:		Line 40:
	{{Warning\|\|Do not open the topcaps nor use the power supply accessible via the topcaps as an outlet.}}		{{Warning\|\|Do not open the topcaps nor use the power supply accessible via the topcaps as an outlet.}}

	The viewport (#5) allows you to do a visual check of the electrode tips (Cu electrodes come with the standard VSP-G1 unit, already mounted in the reactor housing) without opening the reactor housing. It will be necessary to remove the viewport for cleaning and maintenance activities, but under normal conditions the viewport must be kept in place to reduce the risk of exposure to high voltage and nanoparticles. For this reason, the viewport is attached to the reactor using an O-ring and clamp (#7), which can only be removed by the use of a tool. The viewport ~~filter~~ (#6) can be removed from the viewport for a better view of the electrodes, but it is necessary to keep the ~~filter in~~ place during operation due to UV radiation given off by the spark.		The viewport (#5) allows you to do a visual check of the electrode tips (Cu electrodes come with the standard VSP-G1 unit, already mounted in the reactor housing) without opening the reactor housing. It will be necessary to remove the viewport for cleaning and maintenance activities, but under normal conditions the viewport must be kept in place to reduce the risk of exposure to high voltage and nanoparticles. For this reason, the viewport is attached to the reactor using an O-ring and clamp (#7), which can only be removed by the use of a tool. The viewport cover (#6) can be removed from the viewport for a better view of the electrodes, but it is necessary to keep the coverin place during operation due to UV radiation given off by the spark.

	{{Warning\|\|Do not remove the ~~filter~~ on the viewport, which provides eye protection. If the viewport needs to be cleaned, make sure the spark generator is turned off and the reactor has been relocated to a safe environment.}}		{{Warning\|\|Do not remove the cover on the viewport, which provides eye protection. If the viewport needs to be cleaned, make sure the spark generator is turned off and the reactor has been relocated to a safe environment.}}

	The unit is packed with four blind caps (not pictured) to be installed on any of the four gas connections (#8 and #9 in the above diagram) that will not be used in your setup. It is important that the left connection, labeled "INLET ONLY" (#8), is only used for a gas inlet connection. It is also important that the connection is flexible, allowing the tube freedom of lateral movement during the electrode alignment procedure.		The unit is packed with four blind caps (not pictured) to be installed on any of the four gas connections (#8 and #9 in the above diagram) that will not be used in your setup. It is important that the left connection, labeled "INLET ONLY" (#8), is only used for a gas inlet connection. It is also important that the connection is flexible, allowing the tube freedom of lateral movement during the electrode alignment procedure.

T.coppejans: /* Symbols */

2017-07-05T09:57:34Z

Symbols

← Older revision		Revision as of 09:57, 5 July 2017
Line 116:		Line 116:
	\| Refers to the entire User Manual. Information about leak tightness can be found in the <mark>''Miscellaneous operating protocols'' section.</mark>		\| Refers to the entire User Manual. Information about leak tightness can be found in the <mark>''Miscellaneous operating protocols'' section.</mark>
	\|-		\|-
	\| [[File:Reactor housing danger.png\|thumb\|200px\|center\|Do not operate without reactor]] \|\| On the mount plate underneath the reactor housing. \|\| Do not remove reactor housing when running the spark generator. \|\| See ~~<mark>''System description: Reactor~~ assembly~~''</mark>~~.		\| [[File:Reactor housing danger.png\|thumb\|200px\|center\|Do not operate without reactor]] \|\| On the mount plate underneath the reactor housing. \|\| Do not remove reactor housing when running the spark generator. \|\| See [[VSP-G1_User_Manual#Mounting_the_reactor_assembly \| mounting the reactor assembly section in the user manual]] for more information.
	\|-		\|-
	\| [[File:High voltage tamper resist updated.jpeg\|thumb\|128px\|center\|High voltage warning]] \|\| On one of the screws of the cover plate at the top of each reactor end cap.		\| [[File:High voltage tamper resist updated.jpeg\|thumb\|128px\|center\|High voltage warning]] \|\| On one of the screws of the cover plate at the top of each reactor end cap.
Line 122:		Line 122:
	\| There are no user-serviceable parts inside. For service personnel only.		\| There are no user-serviceable parts inside. For service personnel only.
	\|-		\|-
	\|[[File:Warranty void.jpeg\|thumb\|128px\|center\| Warranty seal ]] \|\| On one of the screws holding a plate of the base unit housing \|\|Warranty void if seal is broken. There are no user-serviceable parts in the reactor base unit. Do not remove any of the plates, additional warranty seals are present inside the housing on all cover plates. \|\| Refer to the [[#~~Further troubleshooting~~\|Troubleshooting section]] when you encounter issues with the base unit or contact VSParticle.		\|[[File:Warranty void.jpeg\|thumb\|128px\|center\| Warranty seal ]] \|\| On one of the screws holding a plate of the base unit housing \|\|Warranty void if seal is broken. There are no user-serviceable parts in the reactor base unit. Do not remove any of the plates, additional warranty seals are present inside the housing on all cover plates. \|\| Refer to the [[VSP-G1_User_Manual#Troubleshooting\|Troubleshooting section in the user manual]] when you encounter issues with the base unit or contact VSParticle.
	\|-		\|-
	\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See <mark>''System description: Reactor assembly''</mark>.		\| [[File:Viewport clamp.png\|thumb\|200px\|center\|View port clamp]] \|\| On the viewport clamp. \|\| Use this viewport clamp only for attaching the viewport to the reactor assembly. \|\| See <mark>''System description: Reactor assembly''</mark>.